Services
72
After the configuration, users from the internet can access the FTP server by visiting “Intranet
service application layer protocol name://WAN IP address of the ONT”. If the remote port number
is different from the default intranet service port number, the visiting address should be: “Intranet
service application layer protocol name://WAN IP address of the ONT:Remote port number”. In this
example, the address is “ftp://102.33.66.88”. You can find the WAN IP address of the ONT in
Device status.
To access the FTP server from the internet:
Open the file explorer on a computer that can access the internet, and visit ftp://102.33.66.88.
Enter the user name and password to access the resources on the FTP server.
If you want to access the server within a LAN using a domain name, refer to the solution Dynamic
DNS + Port Forwarding.
To Next Page
Loading...
