Tenda TEG3224P - Page 41

User Guide
35
c
1. Enter a valid aggregation group number (1-6);
2. Select static aggregation;
3. Select ports to join the aggregation group. Up to 8 ports and down to 2 ports can be added to each.
4. Click OK and the group will be created.
Note-------------------------------------------------------------------------------------------------------------------------------
Once ports in static aggregation group are linked successfully, they will be aggregated and not be
affected by port speed.
-------------------------------------------------------------------------------------------------------------------------------------------
 LACP Aggregation—Config
To enter the configuration screen as seen below, click New:
1. Enter a valid aggregation group number (1-6);
2. Select LACP aggregation;
3. Select ports to join the aggregation group. Up to 8 ports and down to 2 ports can be added to each.
4. Click OK and the group will be created.