Tenda TEG3224P - Page 76

User Guide
128
BPDU
Processing
Select a BPDU processing method:
Broadcast/Filter.
This option takes effect only if STP is disabled
globally. By default, BPDU packets are
broadcasted.
Max Age
Config a max aging time for messages. You may
choose a time between 6 and 40 seconds. The
default value is 20s.
Hello Time
Config the Hello Time. You may choose a time
between 1 and 10 seconds. The default value is 2s.
Forward Delay
The latency time for a bridge port to switch from a
Listening state to a Learning state or from a
Learning state to a Forwarding state. Valid values
range from 4 to 30 seconds. The default is 15s.
Max Hop-count
Config max hop-count. In MSTP mode, it
decreases by 1 upon every switch. If the received
BPDU hop value is 1, this packet will be discarded.
Note--------------------------------------------------------------------------------------------------------------------------------
Max Age should meet below requirements:
Max Age >= 2 x (Hello Time + 1);
Max Age <= 2 x (Forward Delay - 1).
-------------------------------------------------------------------------------------------------------------------------------------------
MSTP Domain Setup
Click Device Management -> STP -> MSTP Domain Setup to enter interface below:
Fields on the screen are described below:
Field
Description
Domain Name
Config switch domain name (32 characters
allowed). The default is the device's MAC
address.