User Guide
143
Note: You must create a group before you can add a user.
1. Specify a user name, say, zhangsan.
2. Specify a group name. All existing groups are displayed in the drop-down list.
3. Select a Security Level from the drop-down list.
4. Select an Authentication Mode from the drop-down list and enter a password and confirm the
password (at least 8 characters). If noauth/nopriv is selected, this field will be greyed out.
5. Select an Encryption Mode from the drop-down list and enter a password and confirm password
(at least 8 characters). If noauth/nopriv or auth/noprivv is selected, this field will be greyed out.
To edit users, click the corresponding user name to enter interface for modification.
Group
To enter the screen below, click Device Management -> SNMP -> Group.
Here you can see at a glance all existing groups.
Click Add to enter below interface:
To Next Page
Loading...
