Weekly Check (40 Hours)
__ Perform The Daily Check
__ Perform Weekly Lubrication
__ Check Swing Reducer Oil Level
__ Check Axle Oil Level (after initial change)
__ Check Battery Condition
__ Check Tire Pressure And Condition
__ Check Air System Safety Valve
__ Check Torque On Wheel Lug Nuts
__ Check Hydraulic Cylinders And Rods
__ Make Thorough Inspection Of Wire Rope
__ Visually Inspect All Structural Members And Welds For Cracks, Alignment and Wear
__ Check Boom For Wear Cracked Welds, Alignment And Missing Or Illegible Decals
__ Check Engine Manufacturer’s Manual For Additional Maintenance Requirements
__ Clean Machine Weekly If Salt Covered To Prevent Rust And Corrosion
147P/N 12261-683 REVISED: January 2015
To Next Page
Loading...
