The operator will be notified of the need for a parked regeneration due to the illumination of
the yellow DPF Regeneration Light.
The sequence of lights is as follows:
1.
The DPF Regeneration Light will be illuminated prior to any engine protection
measures being taken. Once the light is lit, the parked regeneration process should be
initiated.
2. If no regeneration occurs after the intial DPF Regeneration Light illumination, the light
will begin blinking and a parked regeneration should be initiated as soon as possible.
159P/N 12261-683 REVISED: January 2015
To Next Page
Loading...
