- Operating on steep grades requires caution because the oil in the engine or transmission
will move to one side of the engine or transmission. As a result, the engine or transmission
may not be fully lubricated which could damage the engine or transmission.
- The operator must be very careful on steep side slopes to avoid tipping the crane.
NOTE: This machine can travel on 15° side slopes which have a firm level prepared
surface. Due to variations in surface, tire pressure, bumps, potholes, etc., we
recommend that travel on side slopes be limited to 5° and that the boom be
horizontal or below.
227P/N 12261-683 REVISED: January 2015
To Next Page
Loading...
