Electrocution Hazard
Contact with electric power lines will result in death or serious injury.
Before operating the machine, contact the electric power line owner to disconnect, move or
insulate power lines.
Improper lifting of personnel can result in death or serious injury
Use of this machine to hoist, lower, swing or otherwise handle personnel must only be
done in compliance with OSHA 1926.1431 and ANSI B30.23.
MAINTAIN CLEARANCE LISTED
Line Voltage Required Clearance
0 to 50KV 10 ft (3m)
50 to 200KV 15 ft (4.6m)
200 to 350KV 20 ft (6.1m)
350 to 500KV 25 ft (7.6m)
500 to 750KV 35 ft (10.7m)
750 to 1000KV 45 ft 13.7m)
>1000KV Refer to Operator's Manual
Before operating the machine, contact the electric power line owner to disconnect, move
or insulate power lines.
T300-1_T500-1_T780
Safety
28 P/N 12261-683
REVISED: January 2015
To Next Page
Loading...
