SAFETY PRECAUTIONS FOR MOUNTING OR DEMOUNTING RIMS AND WHEELS
DO’S AND DON’TS
DO DON'T
1. Deflate tires completely prior to
demounting by removing the valve core.
1. Do not use loads or inflation pressures
exceeding the manufacturer’s
recommendations.
2. Replace bent, cracked,worn, corroded,
or damaged parts.
2. Don’t re-inflate a tire that has been run flat or
seriously underinflated without first demounting
and inspecting the tire and rim assembly.
3. Inflate tires in a safety cage.
4. Inspect wheel nuts periodically for
excessive wear, corrosion, proper
centering and nut torque.
Tire and rim servicing can be dangerous and must be done only by trained
personnel using proper tools and procedures. Failure to read and compy with all
procedures may result in serious injury or death to you or others.
T300-1_T500-1_T780
Maintenance
356 P/N 12261-683
REVISED: January 2015
To Next Page
Loading...
