POWER LINE SAFETY
1. Determine whether there are power lines in the area before starting any job. Only
operate around power lines in accordance with Federal, State and Local Regulations
as well as ANSI B30.5 latest edition.
2. Never remove materials from under powerlines with a crane if the boom or machine is
capable of contacting them.
3.
No part of crane or load must come in contact with, or violate the minimum allowable
clearance required for operation of crane near, electrical lines.
Electrocution Hazard
Contact with electric power lines will
result in death or serious injury.
Maintain Clearance Listed
(Continued on next page ...)
39P/N 12261-683 REVISED: January 2015
To Next Page
Loading...
