LEAK BETWEEN HOUSING AND WEAR PLATE OR BETWEEN WEAR PLATE AND
GEROLER ASSEMBLY
CAUSE REMEDY
Motor housing bolts loose Clean mating surfaces and tighten nuts to
appropriate value
Pinched “O” ring seal Replace
LEAK AT OIL PORTS
CAUSE REMEDY
Damaged seal or “O” ring Replace “O” ring or seal
Poor fittings Replace fittings carefully
Damaged threads Replace housing
T300-1_T500-1_T780
Troubleshooting
418 P/N 12261-683
REVISED: January 2015
To Next Page
Loading...
