SLIP AND FALL PREVENTION
3. Keep the machine clean and dry. Remove all oil, grease, mud, ice and snow from
walking surfaces.
4. Store all tools, rigging and other items in the tool box.
5.
Replace all broken ladders or other access system components.
6. Keep non-slip surfaces in good condition.
7. Never jump off the machine. Instead, use the hand holds and step designed for
entering and exiting the machine. Face the machine and use three points of contact to
ensure your safety.
T300-1_T500-1_T780
Safety
58 P/N 12261-683
REVISED: January 2015
To Next Page
Loading...
