TL260
Maintenance
06_Maintenance_en.fm - V 0.1 - 14.4.11
69 / 187
6
11
Changing the engine oil filter
Fig. 6-9 Changing the engine oil filter
The engine oil filter must be replaced every time the engine oil is changed.
Place suitable oil collecting vessels under the engine oil filter.
Clean the outside of the engine oil filter.
Unscrew the filter cartridge (1) using a commercially available tool.
Check that the fastening stud is firmly secured in the filter head.
Dispose of the filter cartridge environmentally.
Check the condition of the filter head and clean it.
Fill the new filter with oil.
Wet the seal ring with oil and turn the cartridge on hand-tight.
Remove oil contamination on the engine.
Perform a test run and check the engine oil filter cartridge for leaks.
To Next Page
Loading...
