TESA Micro-Hite Plus M - Page 39

39
M
Enabling keys/gauge Displaying Explanation
8
8
9
Display shows MIN value.
min max
0
5
6 Display shows MAX minus MIN value.
7 Display shows MAX value.
To quit MAX/MIN mode
and return to measuring mode, press function key
. References that were active before entering in
the MAX/MIN mode will be activated again.
If automatic numbering is enabled (dip switch 6 set
on ON), displayed values MAX minus MIN, MAX
and MIN will be successively registered as M09,
M10, M11 etc.
To restart MAX/MIN mode,
simply press key .
8