6.1
TESA Micro-hite
plus M height gauges
Ordering information
6 DELIVERY PROGRAMME
Each TESA Micro-hite plus M base set consists of the following components:
1 TESA Micro-hite plus M 350 or 00730060
TESA Micro-hite plus M 600 or 00730061
TESA Micro-hite plus M 900 00730062
1 Standard insert-holder 00760143
1 Standard probe insert with a 5 mm dia. tungsten carbide ball tip 00760062
1 Master piece with nominal dimension to 6.35 mm / 0.25 in 00760219
1 Electric pump for creating the air-cushion under the height gauge base, already mounted 00760142
1 Battery pack 00760141
1 Mains adaptor 110 to 240 Vac / 50 to 60 Hz 04761054
1 Cable EU for adaptor 04761055
1 Cable US for adaptor 04761056
1 Dust cover for TESA Micro-hite plus M 350 or 00760151
TESA Micro-hite plus M600 or 00760152
TESA Micro-hite plus M900 00760153
1 SCS calibration certificate
1 Instruction manual with a declaration of conformity
1 Shipping box for TESA Micro-hite plus M 350 or 00760154
600 or 00760155
900 00760156
TESA Micro-hite plus M base set 350 600 900
Order number 00730063 00730064 00730065
Measuring span 365 mm 615 mm 920 mm
/ 14 in / 24 in / 36 in
Application range 0 à 520 mm 0 à 770 mm 0 à 1075 mm
with standard insert-holder 00760143 / 20 in / 30 in / 42 in
Application range 0 à 575 mm 0 à 825 mm 0 à 1130 mm
with insert-holder 00760057 / 22 in / 32 in / 44 in
Application range 0 à 745 mm 0 à 995 mm 0 à 1300 mm
with insert-holder S07001622 / 29 in / 39 in / 51 in
00760164
00760219
To Next Page
Loading...
