7DHB MPE850 UTV Rev A | 409135 |
2 Safety
2.2 Important safety messages
2.2 Important safety messages
Operating the engine during diagnostic work poses a safety risk to
persons.
► Pay particular attention to the safety messages in the vehicle
manufacturer‘s documentation.
► All diagnostic tasks on the engine must be performed by
appropriately trained personnel.
► Operate the engine during the diagnostic work only if it is absolutely
necessary.
► Only connect the power supply to the engine if it is absolutely
necessary.
► Always be aware that engines requiring diagnostic work may not be
in expected condition.
Defective engine components can cause serious engine damage and can
pose a safety risk to persons.
► Check all components before installation.
► Always replace defective components.
All the components in your engine have been carefully tested and fulfill
strict quality and safety requirements.
► Textron Motors offers spare parts to the highest quality. Ensure that
equivalent spare parts corresponds with this quality requirements.
Engine modifications may pose a safety risk to persons.
► Do not install add-on parts or modify the engine.
Missing protective equipment poses a safety risk to persons.
► Attach all protective equipment after completing the service tasks.
Unsuitable tools pose a safety risk to persons.
► Use tools listed in chapter 3 Tools and accessories or equivalent
tools.
Engine components become extremely hot during operation.
► Do not touch any engine components during operation.
► Turn off the engine and wait until the components have cooled
before making contact.
Operate the engine
Defective parts
Spare parts
Add-on parts and modifications
Protective equipment
Tools
Hot engine components
To Next Page
Loading...
