Textron Stampede 900 2017 - Skid Plate Removal

B
28
Repair and Service Manual
BODY
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
668061
Skid Plate Removal
Fig. 15 Skid Plate
Tool List Qty.
Ratchet ........................................................................ 1
Torx Bit, T30 ................................................................1
Torque Wrench, in lbs..................................................1
1. Remove the screws (4) that secure the skid plate (1)
and skid guard bracket (2) to the bottom of the frame
(See Fig. 15).
2. Slide the rear of the skid plate forward and down off
the rear frame weldment.
3. Installation is the reverse order of removal.
4. Tighten the hardware to the torque specified below:
4
1
2
Front of Vehicle
Item Torque Specification
4 20 - 44 in. lbs. (2 - 5 Nm)