Textron Stampede 900 2017 - Standard Brush Guard Removal

B
18
Repair and Service Manual
BODY
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
668061
Standard Brush Guard Removal
Fig. 3 Standard Brush Guard
Tool List Qty.
Ratchet ........................................................................ 1
Socket, 17mm.............................................................. 1
Wrench, 17mm ............................................................ 1
Torque Wrench, ft. lbs.................................................. 1
1. Remove two bolts (3) and nuts (4) that secure the
brush guard (1) to the bracket (2) (See Fig. 3).
2. Remove four bolts (3) and nuts (4) that secure the
brush guard (1) to the frame.
3. Remove the brush guard.
4. Installation is the reverse order of removal.
5. Tighten the hardware to torque specified below.
1
4
3
2
Front of Vehicle
Item Torque Specification
3 30 - 33 ft. lbs. (40 - 45 Nm)