B
50
Repair and Service Manual
WEATHER PROTECTION
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
668061
Installing Canopy Clamps
Fig. 2
1. Place canopy clamps (3), with the hinged side facing
out, onto each side ROPS tube (Ref. Fig. 2).
2. Close the hinges around the ROPS tubes and
secure with Torx bolts (11) and washers (12) (Ref.
Fig. 3).
3. Finger tighten hardware to allow for adjustment.
Fig. 3
Front of Vehicle
3
3
4
6
7
5
11
12
3
Front of Vehicle
To Next Page
Loading...
