Textron Stampede 900 2017 - Cowl Removal

B
16
Repair and Service Manual
BODY
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
668061
Cowl Removal
Fig. 1 Cowl and Front Fascia
Tool List Qty.
Ratchet ........................................................................ 1
Torx Bit, T30 ................................................................1
Pry Bar......................................................................... 1
Screwdriver, Flat Tip .................................................... 1
1. Unlock the quarter-turn fasteners on the hood. Open
the hood (2) to vertical and pull straight up to remove
(See Fig. 1).
2. Remove the nuts (25) that secure the grill (24) to the
front fascia (3). Remove the grill.
3. Disconnect the headlights from the wire harness.
4. Remove the plastic rivets (8) and screws (27) that
secure the fascia to the cowl (1). Remove the fascia
from the vehicle.
5. Remove screws (7) and plastic rivets (8) that secure
the cowl (1) to the frame. Remove the cowl.
6. Installation is the reverse order of removal.
NOTICE: The cowl can be removed with the front
fascia attached to the cowl or it can be removed
separately.
1
25
27
28
7
8
3
24
2