B
64
Repair and Service Manual
BRAKES
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
668061
Figure 10 Brake Pedal Removal
Accelerator Pedal Removal
Tool List Qty.
Ratchet ........................................................................ 1
Socket, 10mm.............................................................. 1
Wrench, 10mm ............................................................ 1
1. Disconnect the accelerator wire from the harness.
2. From under the vehicle, remove the two bolts that
secure the accelerator pedal to the vehicle frame
(Ref. Figure 11).
3. Remove the pedal.
4. Installation is the reverse of removal.
5. Tighten nuts to the torque specified below.
Figure 11 Accelerator Pedal
Item Torque Specification
15 9 - 10 ft. lbs. (12 - 14 Nm)
Front of Vehicle
6
7
2
11
10
9
Front
of
Vehicle
Chassis
Frame
Accelerator
Pedal
15
To Next Page
Loading...
