11DHB MPE850 UTV Rev A | 409135 |
4 Lights in vehicle
4.3 Malfunction indicator light (MIL)
4.3 Malfunction indicator light (MIL)
Description Cause Remedy
Illuminated for a few seconds
when the ignition is switched
on.
There is no malfunction.
Self test of the light.
–
Not illuminated when the
ignition is switched on.
The malfunction indicator light
(MIL) or wiring is defective.
► Check the wire harness. (See
the vehicle manufacturer‘s
documentation.)
► Check the malfunction indicator
light (MIL) and wiring. (See
the vehicle manufacturer‘s
documentation.)
Flashes when the ignition is on
and the engine is running.
Emission-related malfunction.
There is at least one trouble
code saved in the control unit.
► Display the trouble codes. (See
chapter 5.1 Displaying trouble
codes.)
Illuminates when the ignition is
on and the engine is running.
Malfunction.
There is at least one trouble
code saved in the control unit.
To Next Page
Loading...
