10 DHB MPE850 UTV Rev A | 409135 |
4 Lights in vehicle
4.1 Oil pressure warning light | 4.2 Temperature warning light
4 Lights in vehicle
4.1 Oil pressure warning light
The following lights are supported by the engine management system. Read the service manual and vehicle
manufacturer‘s documentation for more information.
– Oil pressure warning light
– Malfunction indicator light (MIL)
– Temperature warning light
Description Cause Remedy
Illuminates a few seconds
when the engine is started.
There is no malfunction.
The oil pressure warning light
Illuminates until the required oil
pressure is achieved.
–
Illuminates while the engine is
running.
NOTICE! Oil pressure too low.
Serious engine damage due to
insufficient lubrication.
► Switch off the engine immediately.
► Check the oil pressure. (See
chapter 6 Test procedures at
engine.)
► Check the switch oil pressure.
► Check the oil pressure warning
light and wiring. (See the vehicle
manufacturer‘s documentation.)
4.2 Temperature warning light
Description Cause Remedy
Flashes. NOTICE! The Coolant
temperature is too high.
Serious engine damage
caused by overheating.
► Display the trouble codes. (See
chapter 5.1 Displaying trouble
codes.)
To Next Page
Loading...
