B
34
Repair and Service Manual
FRAME
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
668061
Tool List Qty.
Ratchet ........................................................................ 1
Socket, 17mm.............................................................. 1
Wrench, 17mm ............................................................ 1
Torque Wrench, ft. lbs.................................................. 1
1. Remove the bolts (38) that secure the rear shock
tower brace (32) to the frame (1) (Ref. Fig. 5).
Remove the brace.
2. Installation is in the reverse order of removal.
3. Tighten hardware to the torque specified below:
Fig. 6 Seat Frame and B-Pillar Crossmember
ITEM NO TORQUE SPECIFICATION
38
15 - 18 ft.lbs. (20 - 24 Nm)
32
33
34
Front of Vehicle
1
10
31
28
27
30
Chassis Frame
B-Pillar
40
41
42
To Next Page
Loading...
