Operation
Instrument Controls Menu
3-52 Model 42i Low Source Instruction Manual Thermo Electron Corporation
Alarms The Alarms status screen allows the user to select the alarm status for the
selected relay output. The selected item is shown by “<--” after it. Items
displayed are determined by the options installed.
• In the Main Menu, choose Instrument Controls > I/O Configuration >
Output Relay Settings > Select Relay > Instrument State > Alarms.
• Use and to scroll through a list of choices.
• Press to save the new selection for the relay.
Non-Alarm The Non-Alarm status screen allows the user to select the non-alarm status
for the selected relay output. The selected item is shown by “<--” after it.
Items displayed are determined by the options installed.
• In the Main Menu, choose Instrument Controls > I/O Configuration >
Output Relay Settings > Select Relay > Instrument State > Non-Alarm.
• Use and to scroll through a list of choices.
• Press to save the new selection for the relay.
ALARM STATUS ITEMS:
>NONE
GEN ALARM <--
NO CONC MAX
NO CONC MIN
NO2 CONC MAX
NO2 CONC MIN
NOx CONC MAX
ª
RANGE AVG DIAGS ALARM
NOx CONC MIN
INT TEMP
CHAMB TEMP
COOLER TEMP
NO2 CV TEMP
PRESSURE
OZONE FLOW
MB STATUS
MIB STATUS
I/O BD STATUS
CONC ALARM
To Next Page
Loading...
