THOMSON MEC 320 - GENSET CONTROLLER - Page 38

MEC 320 GENSET CONTROLLER
PM079 Rev 0 07/06/08 38 Thomson Technology
The display LEDs are indicating as follows:
Alarm inh.: Indicates alarm inhibit active.
Power: Indicates auxiliary supply ON.
Alarm/Shutdown:
Flashing: Unacknowledged alarms present.
Fixed: Acknowledged alarms present.
Self check OK: Indicates self check OK.
Generator running.
Generator breaker Open/Closed.
Mains breaker Open/Closed.
Mains voltage OK.
Auto Mode.
Manual Mode.