MEC 320 GENSET CONTROLLER
PM079 Rev 0 07/06/08 7 Thomson Technology
3. General product information
This chapter will deal with the unit in general and its place in the THOMSON TECHNOLOGY
product range.
Introduction
The MEC 320 is part of the THOMSON TECHNOLOGY product family.
The concept of the MEC 320 is to offer a cost-effective solution to gen-set builders, who need a
flexible generator protection and control unit for medium to large gen-set applications. Being part
of the THOMSON TECHNOLOGY product family, the standard functions can be supplemented
with a variety of optional functions.
Type of product
The Automatic Gen-set Controller is a micro-processor based control unit containing all
necessary functions for protection and control of a gen-set.
It contains all necessary 3-phase measuring circuits, and all values and alarms are presented on
the LCD display
PC utility software warning
It is possible to remote control the gen-set from the PC utility software M-
Vision or the Graphical Display Unit (GDU) by use of a modem. To avoid
personal injury make sure that it is safe to remote control the gen-set.
To Next Page
Loading...
