THOMSON MEC 320 - GENSET CONTROLLER - 4430 Wire Failure VDO Input 106

MEC 320 GENSET CONTROLLER
PM079 Rev 0 07/06/08 84 Thomson Technology
4430 Wire failure VDO input 106
No. Setting Min. setting Max. setting Factory
setting
4431 W. fail. VDO 106 Max. 60% 100% 100%
4432 W. fail. VDO 106 Min. 0% 40% 0%
4433 W. fail. VDO 106 Output A R0 (none) R0 (none)
4434 W. fail. VDO 106 Output B R0 (none)
Option
dependent
R0 (none)
4435 W. fail. VDO 106 Enable OFF ON OFF
4436 W. fail. VDO 106 Fail class Alarm (1) Trip MB (6) Warning (2)