3.2 Technical Data
PM100 / page 8
3.2 Technical Data
(All technical data are valid at 23 ± 5°C and 45 ±15% humidity)
3.2.1 PM100 Display Unit
General Specifications:
Display: 240 x 160 pixel LCD with EL backlight
Display Format: Digit, Analog needle, histogram, statistics and menu
screens
PC Communication: RS-232
Baud Rate: 2400 – 115200 bps
Data Acquisition:
Photo-diode current range: 0.1nA - 4mA
Thermal-sensor voltage range: 1µV - 10mV
Accuracy: ±1% (console)
Resolution: 16 to 24 bit (Σ∆A/D Converter)
Sample Rate: 6 Hz
Analog Output:
Voltage Range: 0 – 4.095V
Resolution: 12 bit (1mV)
Sample Rate: 6 Hz
Power Range: 0.001V/mW – 1000V/mW, Software Adjustable
Connector: SMA
Power Management:
Battery Pack: NiMH, 1500mAh, 3.6V
Battery Run Time: > 12 hours (backlight off)
Charger: built-in 2 hr. battery charger
Power Supply: Plug-in power supply
Input: 85 – 264 VAC, 50 – 60 Hz
Output: 9VDC @ 1.1A
To Next Page
Loading...
