5.1 Calibration
PM100 / page 45
5 Calibration and Warranty
5.1 Calibration
Thorlabs optical power meters and sensors are precise instruments that are designed
to deliver very accurate measurements and provide useful service over a long period
of time. For maintaining this high level of performance, Thorlabs recommends to
have the measurement system serviced and recalibrated once a year.
Thorlabs will service and recalibrate the power meter and sensor head for a nominal
fee. Please contact Thorlabs customer service to make the appropriate arrange-
ments.
5.2 Warranty
Thorlabs warrants material and production of the PM1xx power meter system for a
period of 24 months starting with the date of shipment. During this warranty period
Thorlabs will see to defaults by repair or by exchange if these are entitled to
warranty.
For warranty repairs or service the unit must be sent back to Thorlabs or to a place
determined by Thorlabs. The customer will carry the shipping costs to Thorlabs, in
case of warranty repairs Thorlabs will carry the shipping costs back to the customer.
If no warranty repair is applicable the customer also has to carry the costs for back
shipment.
In case of shipment from outside EU duties, taxes etc. which should arise have to be
carried by the customer.
Thorlabs warrants the hard- and software determined by Thorlabs for this unit to
operate fault-free provided that they are handled according to our requirements.
However, Thorlabs does not warrant a faulty free and uninterrupted operation of the
unit, of the soft- or firmware for special applications nor this instruction manual to be
error free. Thorlabs is not liable for consequential damages.
Restriction of warranty
To Next Page
Loading...
Need help?
General
