7.3 Certifications and Compliances
PM100 / page 51
7.3 Certifications and Compliances
Category Standards or description
EC Declaration
of Conformity -
EMC
Meets intent of Directive 89/336/EEC for Electromagnetic Compatibility.
Compliance to the following specifications as listed in the Official Journal of the
European Communities is given:
EN 61326 EMC requirements for Class A electrical equipment
for measurement, control and laboratory use,
including Class A Radiated and Conducted
Emissions and Immunity.
1,2
IEC 61000-4-2 Electrostatic Discharge Immunity (Performance
criterion C)
1
IEC 61000-4-3 Radiated RF Electromagnetic Field Immunity
(Performance criterion A)
1
IEC 61000-4-4 Electrical Fast Transient / Burst Immunity
(Performance criterion C)
1
1
For full compliance with these standards this unit
must be operated in a grounded and shielded
housing. The power supply must be propperly
filtered!
2
Emissions which exceed the levels required by
these standards, may occur when this equipment is
connected to a test object.
To Next Page
Loading...
