EasyManua.ls Logo

Toa RM-200M - VM-3240 E VM Extension Amplifier

Toa RM-200M
105 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
103
15.2. VM-3240E VM Extension Amplifier
120 V AC, 60 Hz
690 VA (at rated output), 260 W (according to UL60065), 63 W (at no signal)
240 W, 21 Ω (according to UL60065)
200 W, 25 Ω (according to UL2572)
200 W, 25 Ω (according to CAN/ULC-S576 with separate UPS)
100 W, 50 Ω (according to CAN/ULC-S576)
(Total of Speaker output 1 – 6 Direct Output)
50 Hz – 20 kHz, ±3 dB (at 1/3 rated output), 800 Hz – 2.8 kHz (according to UL2572)
400 Hz – 4 kHz (according to CAN/ULC-S576)
0.7% or less (at rated output, 1 kHz)
85 dB or more
External amplifier Input: 70 V line, removable terminal block (14 pins)
Local Input: –50 dB* (MIC) / –10 dB* (LINE) (changeable), 600 Ω,
electronically balanced, removable terminal block (14 pins)
Speaker output 1 – 2: Max. (240 W) per output
Speaker output 3 – 6: Max. (100 W) per output
Speaker output 2 – 6: Total within rated output, removable terminal block (14 pins)
Allowable minimum load: 245 Ω (20 W) at 70 V line for speaker line failure
detection
Direct output: Direct output from internal or external amplifier,
removable terminal block (16 pins)
Input: Connecting the VM-3240VA
RJ45 female connector
Output: Connecting the VM-3240E
RJ45 female connector
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)
Input 1 – 8: No-Voltage make contact input, open voltage: 24 V DC,
short-circuit current: 2 mA or less, removable terminal block (14 pins)
Output 1 – 8: Isolated open collector output, withstand voltage: 30 V DC,
operating current: 10 mA or less, removable terminal block (14 pins)
Input 1 – 5: No-Voltage make contact input, open voltage: 24 V DC,
short-circuit current: 2 mA or less, RJ45 female connector
Input 6: Isolated voltage input, Inactive: –24 V ±20%, Active: +24 V ±20%,
RJ45 female connector
Status out: Relay contact output, withstand voltage: 40 V DC,
operating current: 2 – 300 mA, RJ45 female connector
Power in: Connecting the VX-2000DS only (operating range: 20 – 40 V DC)
PS out: 28 V DC / 18 A
M4 screw terminal, distance between barriers: 11 mm
22 V DC Special Application, Maximum feeding current 0.3 A (for RM-200M only)
Connecting the VX-2000DS, RJ45 female connector
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)
0 to 49°C (32 to 120°F)
5% to 95% RH (no condensation)
Panel: Aluminum, hair-line, black
Case: Surface-treated steel plate, black, paint
482 (w) x 132.6 (h) x 407 (d) mm (18.98" x 5.22" x 16.02")
16.5 kg (36.38 lb)
Power Source
Power Consumption
Rated Output
Frequency Response
Distortion
S/N Ratio
Input
Output
VM Link
General Control
Emergency Control
Power Input/Output
22 V DC Output
DS Link
Operating Temperature
Operating Humidity
Finish
Dimensions
Weight
AC power cord (2 m) ......................................... 1
Plastic foot ............................................................ 4
Plastic foot mounting screw ................................. 4
Removable terminal plug (14 pins) ...................... 3
Removable terminal plug (16 pins) ...................... 1
Link cable (3 m) ................................................. 1
Note: The design and specifications are subject to change without notice for improvement.
• Accessories

Table of Contents

Other manuals for Toa RM-200M

Related product manuals