Toa RM-200M - Emergency Control Input Terminal Connections

84
13.5. Emergency Control Input Terminal Connections
Following are assignable functions to the Emergency Control Input terminals. (For the function assignments,
refer to "Emergency control input settings" in "Event settings" in the separate software instruction manual.
Evacuation EV broadcast: This function cannot be used.
Evacuation EV stop: This function cannot be used.
Alert EV broadcast: This function cannot be used.
Alert EV stop: This function cannot be used.
Emergency Reset: This function cannot be used.
Amplifier Cut off: This function cannot be used.
End of line: This function cannot be used.