Tokheim Quantium 510 - Page 3

Document Ref 942583-001 Rev 8 1
Quantium 510 Installation Manual Revision Record
REVISION RECORD
Date Revision Page Reason
13/09/2007 1 All Original Issue
10/01/2008 2 3,4 Main Contents revised
10/01/2008 2 1-1 Section 1 Contents revised
10/01/2008 2 1-8 New info added for MID
10/01/2008 2 5-1 Section 5 Contents revised
10/01/2008 2 5-6 to 5-24 New info added for earthing; repagination
10/01/2008 2 5-25,5-26 New pages inserted; repagination
10/01/2008 2 6-1 Section 6 Contents revised
10/01/2008 2 6-2 to 6-8 New info added for MID; repagination
24/03/2009 3 All New Q510 Installation manual to reflect changes to dispenser.
Chapter
18/03/2011 4 2.1.1 Changes to zoning diagram height dimensions, to be
consistant with Q500T1 drawings.
4 2.1.1 Change to the Standard Head configuration zoning diagram.
4 2.1.1 Removal of the Media Head configuration zoning diagram.
4 2.1.1 Addition of the TQC-VGA & Wincor configuration zoning
diagrams.
4 2.3.2 Separate master connection & satellite connection drawings
created. Change to height on connection flange level satellite
drawing.
4 3.1.1 - 3.1.10 Changes to dispenser height dimensions & ground frames to
be the same as Q500T1 drawings.
4 3.1.1 Removal of 2-2 from title.
4 3.1.5 Addition of the VHS 4-4 and renumbering accordingly
4 3.1.8 Change to heading, SVHSM 5-5
4 3.1.10 Addition of Mini-Sat dimensions drawing.
4 3.1.11 Addition of heights to centre of display drawing.
4 3.2.1 - 3.2.8 Changes in the "Note" from 5mm to 8mm
4 3.2.1 Changes to heading, addition of (M)
4 3.2.2 Changes to heading, addition of (M)
4 3.2.5 Addition of the VHS 4-4 and renumbering accordingly
4 3.2.8 Change to heading, addition of HSM 5-8 & SVHSM 5-5
4 3.2.10 Addition of Mini-Sat dimensions ground plan.
4 4.7.2 Removal of the Media Head and replaced by TQC-VGA media
head.
4 4.8 Changes to access the cable glands photos & addition of TQC-
VGA.
4 4.8.2 New procedures showing access to Standard Head & TQC-
VGA calc head.
4 4.83 Removal of the Media Head instructions.
4 5.4.1 New procedures. Wooden transit pallet
4 5.4.2 New procedures. Metal transport profile
4 5.4.3 New procedures. Lifting slots & wooden transit pallet
4 5.4.4 New procedures. Lifting slots & metal transport profile
4 5.6.4 Media head configuration addition of TQC - VGA.
4 Back Page New contacts list