1-1
■
1. PRIOR TO USE
■
Read this manual thoroughly before using this instrument to ensure
proper and safe operation.
■
Always follow the operation procedures described in this manual.
■
Check that there are no devices that generate a strong magnetic field
near the instrument. A strong magnetic field may cause noise and
affect measurement.
■
Do not place any other objects on this instrument.
1.1 Precautions for operation
■
Allow only qualified operators to use the instrument.
■
When using the IOL calculation result to select intraocular lenses, also thoroughly
examine cataract surgery methods and other inspections to determine the
selection.
■
The ultrasound images may contain artifacts.If the image is doubtful, consider
other examinations to carefully determine whether to adopt the value.
■
Precautions when installing the instrument and accessories
- Install the instrument in a location free of water or chemicals. Any water or chemicals
entering the instrument or devices may cause electric shock or failure.
- Do not install the instrument in a location where chemicals are stored or gases may
occur.
Any chemicals or vapor entering the devices may result in fire.
- Check the frequency, voltage, and allowable current (or power consumption) of the
power source. Otherwise, fire or electric shock may occur.
- Connect the power plug to a grounded 3-pin outlet. Otherwise, a short circuit due to
failure of the instrument may result in electric shock.
- Do not place any heavy object on the power cord or squash the power cord. Fire or
electric shock may occur.
To Next Page
Loading...
Need help?
General
