To Next PageTo Next Page
Need help?Do you have a question about the Tomey AL-100 and is the answer not in the manual?
General| Brand | Tomey |
|---|---|
| Model | AL-100 |
| Category | Measuring Instruments |
| Language | English |
Explains precautions and confirmations prior to installing and operating this instrument.
Explains the names and functions of the components of this instrument.
Explains significant information necessary for installing and operating this instrument.
Provides the technical information of this instrument.
Explains your routine inspection and maintenance and replacing spare parts.
Explains the spare parts and option parts of this instrument.
Explains the spare parts and option parts of this instrument.
Explains the specifications for this instrument.
Details safety precautions and general usage guidelines for the instrument.
Provides instructions for unpacking and checking the instrument for damage or missing parts.
Explains the meaning of various symbols used throughout the manual.
Gives a general overview of the AL-100's function and capabilities.
Identifies and describes components located on the front and right side of the AL-100.
Identifies and describes components located on the back and left side of the AL-100.
Outlines essential safety measures to be followed during operation.
Details the steps required to prepare the instrument for operation.
Instructions for connecting various accessories to the AL-100.
Instructions for connecting optional parts, like memory cards.
Step-by-step guide for performing measurements with the AL-100.
Configuring the AL-100 for biometry measurements.
Describes the functions of the buttons on the front panel.
Details the measurement process, including data review and measurement windows.
Explains how to set various measurement parameters.
Covers checking performance, preparation, and the measurement process.
Defines criteria for acceptable waveforms during measurements.
Describes how to use the EDIT function for reviewing and managing data.
Explains the caliper function for measuring distances within the eye.
Details the process and functions related to IOL power calculation.
Introduction to the IOL power calculation module.
Information on calculation results and potential differences.
Explains how to select IOL formulas and enter data.
Procedures and examples for printing measurement and calculation data.
Instructions for saving, loading, and deleting data from the instrument.
Accesses various utility functions like time/date and print mode settings.
Details on using the optional memory card for data storage.
Describes the correct procedure for shutting down the instrument.
Presents the mathematical formulas used for IOL power calculations.
Details the SRK II IOL calculation formula and its parameters.
Details the SRK/T IOL calculation formula and its parameters.
Details the Holladay IOL calculation formula and its parameters.
Details the Haigis standard and optimized IOL calculation formulas.
Details the Showa formula, a modified SRK formula for Japanese users.
Details the Hoffer Q IOL calculation formula and its parameters.
Details the Shammas-PL IOL calculation formula, for post-LASIK.
Explains the formulas used for calculating axial length via biometry.
Provides information about the software version of the AL-100.
Describes the acoustic output parameters, MI and TIS.
Details the terms and conditions of the product's one-year limited warranty.
Instructions on how to safely check and replace the instrument's fuses.
Guidelines for the regular maintenance of the instrument and its components.
Specific instructions for cleaning and disinfecting the biometry probe.
Specific cleaning and disinfection procedures for probes in Europe.
Instructions for maintaining the main unit, including cleaning and care.
Procedure for replacing the printer paper roll.
Guidelines for storing the instrument under appropriate environmental conditions.
Recommendations for keeping and disposing of packing materials.
Addresses common issues like power indicator not lighting or screen display problems.
Lists available optional parts, such as memory cards and chin rests.
Lists available spare parts, including printer paper and immersion attachments.
Details the general specifications of the AL-100.
Provides measurement ranges and accuracies for biometry and IOL calculations.
Specifies the dimensions, weight, and display type of the main unit.
Details the input voltage, frequency, and power consumption.
Information regarding ultrasound energy and its effects.
Describes the mechanical noises the instrument may produce during operation.
Specifies the recommended environmental conditions for operation and storage.
Provides electromagnetic compatibility (EMC) declarations and guidance.
