Tomey UD-800 User Manual

■ 5-2
5.2 Operation life
This instrument is designed to have an operation life of 8 years when operated
under the appropriate environment and it is adequately inspected and serviced.
5.3 Inspection
■ When there is a problem, correct waveforms or images may not be
obtained correctly. Contact Tomey or your local distributor immediately
for repair or replacement.
■ Be sure to hold the connector when removing the measurement probe
from the main unit. Holding and pulling the cord may damage the inner
core wires.
■ Do not touch the connector of the measurement probe, otherwise the
probe may be damaged.
5.4 Routine maintenance
■ Hold the plug when disconnecting the power cord from the outlet to
avoid applying excessive force on the cord. Pulling the cord may
damage the inner core wires, resulting in electric shock or fire.
■ Do not use organic solvents such as thinner, benzene, or acetone to
clean the instrument and accessories. These solvents may damage the
surface of the instrument.
■ Disconnect the power plug from the outlet and place the dust cover
over the main unit when not used for long periods.
■ Place the dust cover over the main unit when not being used.
5.4.1 Maintenance of measurement probes
■ Be sure to hold the connector when removing the probe from the main
unit. Holding and pulling the cord may damage the inner core wires.
■ Never touch the connector,otherwise the probe will be damaged.
■ Attach the protective cap to the probe and place it in the probe holder
when not used.

Tomey UD-800 Specifications

General

Brand	Tomey
Model	UD-800
Category	Measuring Instruments
Language	English