3-63
■
3.8.2 Print
The printer and printing type can be selected in the system setup. Refer to
“3.9.4 b) Selecting and setting printer.”
[Printing by built-in printer]
■
Different waveforms are printed depending on the screen in biometry
mode.
Waveforms to be printed on each screen are as below.
Measurement screen:
The waveform which is the closest to the average is output.
View screen:
Waveform displayed on the screen is printed.
IOL screen:
The waveform the closest to the average value is printed when
entering the IOL screen from the measurement screen. The
waveform displayed on the view screen is printed if entering the IOL
screen from the view screen.
To Next Page
Loading...
