Tomey UD-800 - Page 117

3-85 ■
(3) Header Info.
Select items to always be printed.
Inspection date and time / Version / Patient's name / Sex /
Physician's name / Printing date and time / Patient ID / User-defined
character
(4) IOL Window (IOL power calculation screen)
Make settings for printing from the IOL power calculation screen.
Touch the “Setting” button to open the System Setup screen (Fig. 3).
IOL data number
:
3 / 9 / 15
Appending Measurement
data
:
Yes / No
Select Calculation Result at
Printing
:
Yes / No
(5) IOP Window (intraocular pressure correction screen)
Set whether to print the measurement data on the intraocular pressure
correction screen.
Yes / No
(6) Pachymetry measurement
Make settings for printing on the pachymetry screen.
Touch the “Setting” button to open the System Setup screen (Fig. 2).
Measurement Point (for each
memory)
:
ON / OFF
Bias Value (for each memory)
:
ON / OFF
Average & SD of Bias (average
and standard deviation of bias
value)
:
ON / OFF