■
1-4
- Clean and neatly arrange the accessories and cables.
■
If any failure occurs in the instrument, immediately stop operation, indicate the
failure in the instrument, and contact your local distributor for repairs.
- Do not modify the instrument. Doing so may cause electric shock or failure of the
instrument. There is a high-voltage section in the instrument. Touching this section
will result in death or serious injuries.
- Disconnect the power cord from the outlet when replacing fuses. Otherwise, you
may get electric shock, resulting in death or serious injuries.
- Use the power cord and fuses provided with the instrument or specified by Tomey to
ensure safety. Also, do not use the accessories provided with the instrument for
other equipment.
- Conduct regular inspections of the instrument and components.
- When any instrument failure occurs, indicate the failure, and contact your local
distributor to request inspection and repair. Do not attempt to repair the instrument
yourself.
- When the instrument has not been is use for 1 month or longer, check that the
instrument is operating correctly and safely before starting operation.
Refer to "5.3
Inspection" in this manual for the relevant procedures.
To Next Page
Loading...
Need help?
General
