3-17
■
e) Zoom
This function magnifies the displayed image. Vector mode-A cannot be used
when zoom is used.
The navigation monitor displays the whole image, and the area zoomed in the
monitor is indicated by a frame. Moving the frame moves the displayed area
accordingly.
Touching the “Zoom” button (1) alters the magnification between 100% and
200%.
f) Measurement
This function measures lengths, angles, and areas of the image displayed on the
monitor.
■
When you use the result of this function for operations and medical
treatments, make a comprehensive decision considering the results of
other measurement devices and differences between left and right.
■
The zoom function is not available during measurement. Apply the
zoom function and then take measurement to measure on the enlarged
image.
■
The Vector-A display and smoothing function are not available during
measurement.
■
The measurement points and results are all deleted when the
measurement tool is closed, and they cannot be recovered.
To Next Page
Loading...
