46
BASIC OPERATIONS
BASIC OPERATIONS
FUNDUS TOMOGRAPHY
10 Operate the control lever up and down, right and left to bring the alignment bright spot into the
( ) scale.
11 Each auto function works and the tomogram is automatically displayed on the tomogram live
image area. The preparation for photography is finished.
12 Right before taking a picture, tell the patient that you are about to take a picture of his/her eye
and ask him/her not to blink and to keep watching the green light (internal fixation target).
Set the system to detect the retina position automatically and optimize the image output sensi-
tivity.
NOTE
• If the patient blinks frequently, the auto functions do not work smoothly from
time to time. Ask the patient not to blink as far as circumstances allow.
• When the auto functions do not work or are OFF and the diopter compensa-
tion lens is anything other than (0), tap the button on the tomogram
live image area to detect the retina position automatically and optimize the
image output sensitivity.
• You can change the Z lock position (tomogram display position) by touching
the tomogram live image area if necessary. For details, refer to P.22.
To Next Page
Loading...
Need help?
General
