FCC Compliance
P/N 7010-0926
C-3
FCC/IC RF Radiation Exposure Statement For
Bluetooth and 802.11b/g
To comply with FCC/IC RF exposure compliance requirements, this
device must not be co-located or operating in conjunction with any
other antenna or transmitter.
For mobile operation, To comply with FCC/IC RF exposure
compliance requirements, a separation distance of at least 20cm must
be maintained between the antenna of this device and all persons.
This device must not be co-located or operating in conjunction with
any other antenna or transmitter.
The installer of this device must ensure that the antenna is located or
pointed such that it does not emit RF field in excess of Health Canada
limits for the general population; consult Safety Code 6, obtainable
from Health Canada’s website at www.hc-sc.gc.ca/rpb.
In case that the option GSM/GPRS/EDGE/UMTS/HSDPA Module
(FCC ID: QIPHC25, IC: 267W-HC25) is installed To comply with
FCC/IC RF exposure compliance requirements, this device has been
demonstrated co-location compliance requirement with GSM/GPRS/
EDGE/UMTS/HSDPA Module FCC ID: QIPHC25 & IC: 267W-
HC25, which is an option for GRS. This device must not be co-
located in conjunction with any other antenna or transmitter.
For mobile operation, To comply with FCC/IC RF exposure
compliance requirements, a separation distance of at least 20cm must
be maintained between the GSM antenna provided together with
GSM/GPRS/EDGE/UMTS/HSDPA Module FCC ID: QIPHC25 &
IC: 267W-HC25 and all persons as well as between the antenna of
this device and all persons.
To Next Page
Loading...
Need help?
General
