Troubleshooting
GRS-1 Operator’s Manual
7-2
Troubleshooting Quick List
To reset the software, see “Resetting the Software” on page 7-3.
To reset the hardware, see “Resetting the Hardware” on page 7-4.
For power problems:
If “The GRS-1 does not power up” see page 7-6.
For general GRS-1 problems:
If “The GRS-1 is not receiving data (corrections) from an
external receiver” see page 7-7.
If “Installed software and other data has been erased” see
page 7-8.
For Bluetooth problems:
If “The GRS-1 is no longer connected via Bluetooth” see page 7-
8.
If “You cannot connect to another Bluetooth-enabled device” see
page 7-8.