Topcon Receiver Utility
P/N 7010-0926
4-7
8. Press OK.
If calibration is successful, the Calibration completed
successfully window appears, and the calibration value is saved.
Press OK.
Figure 4-5. Calibration Successful
If you did receive an error message, then you may have rotated
the device too quickly or in the wrong direction. Try to
recalibrate the compass.
Figure 4-6. Calibration Error
If a calibration error appears several times, change the direction a
little and try again.
To Next Page
Loading...
Need help?
General
