Toradex Verdin - Unused Recovery Signal Termination

Verdin Carrier Board Design Guide
Preliminary – Subject to Change
Toradex AG l Ebenaustrasse 10 l 6048 Horw l Switzerland l +41 41 500 48 00 l www.toradex.com l info@toradex.com
Page | 58
2.20.3 Unused Recovery Signal Termination
The CTRL_RECOVERY_MICO# can be left unconnected if the recovery feature is not needed. There
is a pull-up resistor on the module. No external pull-up resistor is allowed on the carrier board.