Instruction Manual – AD Series
5. After selecting the time interval, “
”
will be displayed, indicating that the function has been configured and it is
ready to use.
To use the function, follow the directions given in Chapter 16. To exit the mode menu press the “C” key.
Table 9.1: Animal Weighing Operating Modes
Weighing Initialization: Automatic
Result Clearing: Automatic
Tare: Automatic
When set to Automatic, the scale will automatically
begin the animal weighing process. Once the animal is
removed from the weighing pan, the scale will
automatically tare and prepare for the next weighing.
Weighing Initialization: Automatic
Result Clearing: Manual
Tare: Manual
When set to Semi-Automatic, the scale will
automatically begin the animal weighing process.
Once the animal is removed from the weighing and
the result remains displayed until it is manually
cleared. The scale must be manually tared before the
next weighing.
Weighing Initialization: Manual
Result Clearing: Manual
Tare: Manual
When set to Manual, the animal weighing process
must be manually initialized. Once the animal has
been weighed and the pan cleared the result must be
manually cleared. The scale must be manually tared
before the next weighing.
To Next Page
Loading...
