Totalizing is used to calculate the summation of multiple weights that are recorded sequentially. An “F” indicator will
appear on the screen to indicate the scale is in Totalizing Mode.
1. To enter Totalizing Mode, press the “F” key. Select “” by pressing the “T” key.
2. Place an empty weighing container on the pan. The container’s weight will be displayed. Wait for the weight to
stabilize and press the “T” key to tare.
3. Place the first object in the container.
Automatic and Semi-Automatic:
When set to Auto or Semi-Auto, the weight of the object will be
added to the total automatically. A TOTAL indicator will appear on
the display.
Note: In Automatic the minimum weight must be equal to order
greater than 10d
To Next Page
Loading...
