1. To enter Weighing Mode, press the “F” key. Select “
by pressing the T key.
2. Wait for the stabilization indicator to appear.
3. When weighing, always place the mass in the middle of the
pan. The weighed result may be taken when the stabilization
indicator reappears on the display.
15.1 Zeroing the Scale
1. The scale is armed with the Auto Zero Setting Mechanism (AZSM). AZSM automatically maintains a center of zero
condition within +/- .5d or 5mg.
2. The scale may be re-zeroed manually to obtain a new center of zero. To re-zero the scale manually with a weight
that is out of the AZSM range, make sure the weight and the stabilization indicator are shown on the display.
To Next Page
Loading...
