Instruction Manual – AD Series
CAUTIONARY NOTES AND PRECAUTIONS
Always handle your scale with care. The correct location and proper environment makes an important contribution to the
accuracy of the weighing results of TORBAL precision scales.
The optimum location for your scale:
• Stable, vibration-free base as horizontal as possible
• Away from direct sunlight
• Not exposed to high temperature variations
• Away from direct drafts
• The best location is on a stable bench away from direct drafts, doors,
windows, radiators and air conditioner vents.
• The scale is designed for indoor use only.
• Do not operate the scale in hazardous areas or under dangerous conditions.
• Do not use the scale in locations subject to high humidity or dust.
• Do not connect cables in ways other than those mentioned in this manual.
• Set the scale on a firm, stable, horizontal surface.
• Never stand on or lean on this product. Equipment may fall or collapse, causing
breakage and possible injury.
• Before moving the product, unplug it and unplug all cables connected to it.
• When storing, transporting or returning the scale for service, always use the original
packaging.
• Never attempt to repair, disassemble or modify the scale. Tampering with the scale
may result in injury and cause greater damage to the equipment.
• Be sure to use the specified power source.
• Do not allow foreign matter to fall onto the scale.
• If water or other liquid spills onto the scale, unplug the power cord immediately and
contact technical support.
To Next Page
Loading...
